The Jim Blurton centre punch is made from S1 tool steel, an air hardened tool steel which is easily maintained.
This handheld punch is designed to mark the centre point of the steel when shoemaking
The centre punch offers the best performance when it is maintained well. It is recommended that sharpening of the centre punch is done at normal forging temperatures and allowed to air cool. The centre punch should ideally be placed on the side of the forge whilst cooling. It is not recommended that the centre punch is placed on a cold surface as sudden cooling may cause stress fractures. Any burrs that may occur on the head should be regularly ground back
Available as part of the Jim Blurton Professional Farrier Tool range, the centre punch was developed and tested at Jim’s forge in Mid Wales. It has been tested by some of the world’s leading farriers and equine experts, and is now available worldwide online
- Al seleccionar una opción se actualiza toda la página.
- Presiona la tecla de espacio y luego las teclas de flecha para seleccionar una opción.
- Utiliza las flechas izquierda/derecha para navegar por la presentación o deslízate hacia la izquierda/derecha si usas un dispositivo móvil